购物车图片 Cart ( )

市场价:
I nstructions: This module should be used with the Lerdge Motherboard, so you need to buy one if you don't have. This link of the module is for spare purpose

Number: - + (Inventory
  • An overview of
  • Packing list
  • Common problems
  • User feedback
  •  After-sale guarantee

 

Note: This module should be used with the Lerdge Motherboard, so you need to buy one if you don't have. This link of the module is for spare purpose.
 
Product Description: The power monitoring module, used with Lerdge 3D printer motherboard, can achieve power continued to play, automatically turning off after the printing finished, the software control the power off, monitor the power status and other functions. It can help to achieve interactive printing, and to help in the cases like the unexpected power off or you have to leave during the printing, and other similar issues, considered to be one of the most useful features in 3D printers.
 
Notice on the power continued to play function: In the case of accidental power failure, the system can detecte that situation immediately by this module. But saving the data in this power off moment takes about 1 to 2 seconds to deal with. Most of the switching power supply in the market have enough power to support the system to save the data after the electricity disconnected. But there are also some power supply may not be able to provide the required power to save, which may result in a failed save, and cannot achieve continue printing where it stopped. In this case, users need to switch to higher power supply, or use back-up power supply.
 
(Most of the similar products in the market are called the power to continue to play module, but strictly speaking, it's not rigorous. Actually, more accurate name is power monitoring module.) The similar products in the market are of the same principle, due to the power capacity, the data cannot be 100% saved successfully when accidental power failure happens.

 

LERDGE 3D Printer Power Monitoring Module Continued to Play Printing Automatically Put off Management Module for Lerdge Board

LERDGE 3D Printer Power Monitoring Module Continued to Play Printing Automatically Put off Management Module for Lerdge Board

LERDGE 3D Printer Power Monitoring Module Continued to Play Printing Automatically Put off Management Module for Lerdge Board

 

LERDGE 3D Printer Power Monitoring Module Continued to Play Printing Automatically Put off Management Module for Lerdge Board

LERDGE 3D Printer Power Monitoring Module Continued to Play Printing Automatically Put off Management Module for Lerdge Board

 

 

 

 

weight:145g 

 

Shipping list(Per unit):
 
Power continued to play module * 1pc
 
Power switch with 30cm wires * 1set
 
Metal button switch with lamp reset and 50cm line *1pc (If you need the 1M line, please let us know. If 1M, will add another 1.36USD.)
 
Output signal line 1M *1pc
 
Power 30cm line *3pcs

 

 

 If you need automatically turning off after the printing finished, please select (COMPLETE OFF) on the touch screen setting interface during the printing process.

 

Q1: How to achieve automatically turning off after the printing finished after connected to the power continued to play module.
 
A1: Entry the touch screen settings interface, then the printing process, and the control interface, then check the printing automatically turn off. Shown as below.

 

LERDGE 3D Printer Power Monitoring Module Continued to Play Printing Automatically Put off Management Module for Lerdge Board

 

Q2: What should users pay attention to during installation?
 
A2: The power continued to play module is with the high-voltage power supply (positive and negative). Please do not directly touch, and please do the insulation for it. A shell is recommended for protection purpose.

 

 

LERDGE 3D Printer Power Monitoring Module Continued to Play Printing Automatically Put off Management Module for Lerdge Board

 

 

Using no feedback

 

1. All products will be tested with power on before delivery, to ensure all the functions are ok.

 

2. After receiving the product, please do the test as soon as possible. Please read the manual carefully before testing or using the board. ) Please pay special attention to avoid the circuit burned and static electricity breakdown caused by improper connection. Please note improper operating and man-made damage do not belong to the warranty range.)

 

3. If you test the board and find it not work normally, please double check whether it's the problem of connections or software configuration (usually caused by these kinds of problems). After the double checking and the board still cannot work, please send the products back for us to check. The buyer pay for the return shipping cost first. If it's really the problem of the boards, we'll pay the shipping cost for both sides. But if after checking, we find the product is ok, or it’s caused by improper operating/man-made damage, the buyers should bear the fees for the shipping and the replacements of the components. We are responsible for providing free maintenance services.

 

4. Free maintenance is available for 6 months from the date of purchase. Buyers are responsible for shipping cost and replacement parts. And we bear the shipping cost sending to the buyers.

 

5. Over  6 months, we provide paid maintenance services. The maintenance fees will be charged according to the specific situations.

 

Related products
2017 - 07 - 14
乐积主板配件--卧式机械限位开关产品说明:常开式机械限位开关,体积小巧,安装方便,带触发指示灯。 配合乐积3D打印主板,即插即用。重量:13g发货清单:开关*1个、配套连接线1M(并线)*1条
2017 - 06 - 28
K86 3D Printer
2017 - 06 - 28
Product Name:Drv8825 Stepper Motor Driver ModuleColor:Black The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver.The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applicatio...
2017 - 06 - 28
产品说明:常开式机械限位开关,体积小巧,安装方便,带触发指示灯。 配合乐积3D打印主板,即插即用。重量:13g发货清单:开关*1个、配套连接线1M(并线)*1条
Link
Copyright ©2017 - 2017 深圳前海乐积科技有限公司
犀牛云提供云计算服务
X
3

SKYPE 设置

4

阿里旺旺设置

等待加载动态数据...

等待加载动态数据...

5

电话号码管理

  • 13543321692
6

二维码管理

等待加载动态数据...

等待加载动态数据...

展开