购物车图片 Cart ( )

市场价:
I nstructions: The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver

Number: - + (Inventory
  • An overview of
  • Packing list
  • Common problems
  • User feedback
  •  After-sale guarantee

 

Product Name:Drv8825 Stepper Motor Driver Module

Color:Black

 

The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver.

The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications.
The DRV8825 features adjustable current limiting, overcurrent and overtemperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 – 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).
 
LERDGE 3d Printer Stepstick Accessories Drv8825 Stepper Motor Driver Module Carrier Reprap 4-layer PCB RAMPS replace A4988
Features:
 
1. Simple step and direction control interface
2. Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
3. Can interface directly with 3.3 V and 5 V systems
4. Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout
5. Short-to-ground and shorted-load protection
6. 4-layer, 2 oz copper PCB for improved heat dissipation
7. Exposed solderable ground pad below the driver IC on the bottom of the PCB
8. Module size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)
9. Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates
10. Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
11. 45 V maximum supply voltage
12. Built-in regulator (no external logic voltage supply needed)
 
instructions:  giving a  New Aluminum HeatSink  
 
 LERDGE 3d Printer Stepstick Accessories Drv8825 Stepper Motor Driver Module Carrier Reprap 4-layer PCB RAMPS replace A4988
LERDGE 3d Printer Stepstick Accessories Drv8825 Stepper Motor Driver Module Carrier Reprap 4-layer PCB RAMPS replace A4988
 

LERDGE 3d Printer Stepstick Accessories Drv8825 Stepper Motor Driver Module Carrier Reprap 4-layer PCB RAMPS replace A4988

LERDGE 3d Printer Stepstick Accessories Drv8825 Stepper Motor Driver Module Carrier Reprap 4-layer PCB RAMPS replace A4988

LERDGE 3d Printer Stepstick Accessories Drv8825 Stepper Motor Driver Module Carrier Reprap 4-layer PCB RAMPS replace A4988

LERDGE 3d Printer Stepstick Accessories Drv8825 Stepper Motor Driver Module Carrier Reprap 4-layer PCB RAMPS replace A4988

LERDGE 3d Printer Stepstick Accessories Drv8825 Stepper Motor Driver Module Carrier Reprap 4-layer PCB RAMPS replace A4988

 

 

weight:8g

 

Package Included:DRV8825 *1PCS、New HeatSink *1PCS  

 

LERDGE 3d Printer Stepstick Accessories Drv8825 Stepper Motor Driver Module Carrier Reprap 4-layer PCB RAMPS replace A4988

LERDGE 3d Printer Stepstick Accessories Drv8825 Stepper Motor Driver Module Carrier Reprap 4-layer PCB RAMPS replace A4988

 

Using no feedback

 

 

1. All products will be tested with power on before delivery, to ensure all the functions are ok.

 

2. After receiving the product, please do the test as soon as possible. Please read the manual carefully before testing or using the board. ) Please pay special attention to avoid the circuit burned and static electricity breakdown caused by improper connection. Please note improper operating and man-made damage do not belong to the warranty range.)

 

3. If you test the board and find it not work normally, please double check whether it's the problem of connections or software configuration (usually caused by these kinds of problems). After the double checking and the board still cannot work, please send the products back for us to check. The buyer pay for the return shipping cost first. If it's really the problem of the boards, we'll pay the shipping cost for both sides. But if after checking, we find the product is ok, or it’s caused by improper operating/man-made damage, the buyers should bear the fees for the shipping and the replacements of the components. We are responsible for providing free maintenance services.

 

4. Free maintenance is available for 6 months from the date of purchase. Buyers are responsible for shipping cost and replacement parts. And we bear the shipping cost sending to the buyers.

 

5. Over  6 months, we provide paid maintenance services. The maintenance fees will be charged according to the specific situations.

 

 


Related products
2017 - 07 - 14
乐积主板配件--卧式机械限位开关产品说明:常开式机械限位开关,体积小巧,安装方便,带触发指示灯。 配合乐积3D打印主板,即插即用。重量:13g发货清单:开关*1个、配套连接线1M(并线)*1条
2017 - 06 - 28
K86 3D Printer
2017 - 06 - 28
Product Name:Drv8825 Stepper Motor Driver ModuleColor:Black The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver.The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applicatio...
2017 - 06 - 28
产品说明:常开式机械限位开关,体积小巧,安装方便,带触发指示灯。 配合乐积3D打印主板,即插即用。重量:13g发货清单:开关*1个、配套连接线1M(并线)*1条
Link
Copyright ©2017 - 2017 深圳前海乐积科技有限公司
犀牛云提供云计算服务
X
3

SKYPE 设置

4

阿里旺旺设置

等待加载动态数据...

等待加载动态数据...

5

电话号码管理

  • 13543321692
6

二维码管理

等待加载动态数据...

等待加载动态数据...

展开