购物车图片 Cart ( )
Download News
热点新闻 Hot News

Lerdge-K Board V3.0.5 Firmware --Update Time:2019.08.07

Source:
Release time: 2019-08-07
Viewed: 8624

Lerdge-K Board V3.0.5 Firmware --Update Time:2019.08.07

Lerdge K Board update log:


Lerdge-K V3.0.5 2019.08.07

1. Added parameter setting items for PID auto-tuning


Lerdge-K V3.0.4 2019.07.25

1. Fixing  problem that unexpectedly falling speed when it's printing(There's a unsigned long variable calculate overflow when calculate speed. It will cause result error)

2.Increasing the software retract function. Supporting G10 G11 command.

3. Increasing  the function of setting pause-retract value and pause-Z-axis lifting value

4. Increasing Z-axis offset compensation function to realize Z-axis offset compensation (Old version has no compensation function)


Lerdge-K V3.0.3 2019.07.04

1.Fix the problem that the system can't exit the heating state and can't pause and end printing when starting to print the file after manual preheating.

2.Adjusting the planning speed of road strength of corexy and corexz structure from the original motor speed planning to the axle speed planning

(Function: Printing time is closer to slicing software prediction time.)

3.The UI interface of PID auto-tuning was adjusted. Allowing users to terminate the automatic PID setting process

4.Correcting error of E-axis' icon in manual control interface.

5.Canceled the function of clearing Z-axis fine-tuning when entering the settings interface.(Function: Preventing the debugged z-axis fine-tuning value from being unintentionally cleared)


Lerdge-K V3.0.2 2019.06.11

1.Reprocess the extruder position when the print is paused, compatible with the relative extrusion coordinate mode.


Lerdge-K V3.0.1 2019.05.05

1. Fix the problem that the motor is unlocked in the leveling operation interface.

2. Fix the Z-axis height value in the upper right corner of the print interface as a mosaic problem.

3. Fix the problem that the hot head and the serial number do not match when the hot end error is reported.

4. Fix the problem of homing impact after the three-point leveling of the delta model.

5, Fix the problem of losing two paths when printing continues.

6. Fix the movement problem of deceleration abnormality.

7. Optimize the algorithm for connecting the speed of the road.


Lerdge-K V3.0.0 2019.03.29

1. Reconstructed the underlying software for motion control (major update)

2. fix the problem of Gcode file can not continue to print through the control screen after using M0 pause

3. repair the problem of automatic motor unlocking when manually leveling

4. repair the problem of Corexz model suspension movement

5. add corexz automatic leveling function

6. add delta model equivalent radius automatic measurement function

7. add configuration file automatic export function

8. add the option function of saving print progress when have a memory error

9. deleted the useless options in the setup options

10. Turn off the limit switch function of the mobile control interface.

11. Optimized the double-head switching execution action.

12.Modified the naming serial number of two hot heads and two extruders, from the original T1 T2 E1 E2 to the current T0 T1 E0 E1

Link
Copyright ©2017 - 2017 深圳前海乐积科技有限公司
犀牛云提供企业云服务
X
3

SKYPE 设置

4

阿里旺旺设置

等待加载动态数据...

等待加载动态数据...

5

电话号码管理

  • 13543321692
6

二维码管理

等待加载动态数据...

等待加载动态数据...

展开