购物车图片 Cart ( )
Download News
热点新闻 Hot News

Lerdge-X Board V2.0.2 Firmware --Update Time:2018.10.31

Source:
Release time: 2018-10-31
Viewed: 0

Lerdge-X Board V2.0.2 Firmware --Update Time:2018.10.31

Lerdge X Board update log:

Lerdge-X V2.0.2 2018.10.31

1. Fix the file selection under the root directory of the storage device. If the file is returned to the directory after printing, the file cannot be read.

2. Save the print progress function when adding a TF card to read errors.

Lerdge-X V2.0.1 2018.10.12

1. Fix the problem that the E0 axis cannot adjust the motor direction.

2. Fix the problem that the extrusion motor moves abnormally when performing the refueling operation during the printing process.

Lerdge-X V2.0.0 2018.10.01

1. Open Wi-Fi LAN function (open test)

2.delete the options not used in the settings

3.The z-axis display height in printing is modified to two decimal places after the decimal point

4.Optimize the initialization process of large-capacity storage devices and improve the recognition rate of large-capacity storage devices

5.Add support the COREXZ models structure(test phase)


Lerdge-X V1.0.7  2018.09.12

1. Add the U disk power supply circuit control function (1.0.5 version of the motherboard hardware added USB circuit power supply control function, if using the old firmware, it will cause the U disk read failure).


Lerdge-X V1.0.6 2018.6.12

1. Optimize the screen display dark situation that around the edges.

2. Modify part of the English expression vocabulary in the interface.

3. Fix the bug that auto-leveling data overlays after replacing the filament in the pause mode.


Lerdge-X V1.0.5

1. After setting the factory password, it will hide the operation option of touch calibration and reversal UI, to avoid the misoperation by users that may lead to the touching failure.

2. Open the enabling of saving temperature when accidental power off happens that closed in 1.0.4 version

3. It will show the specific error hotend number when hotend error alarm occurs, to confirm the hotend problem (used to identify whether it is hotend problem or headed bed problem)

4. Fix the repeated homing action during the automatic leveling.

5. Fix the bug of the screen failure caused by the touch calibration failure after inverting the UI.

6.The name of the print file is added to the prompt box after the printing is finished to confirm the printed file.


Lerdge-X V1.0.4

1. Add the wifi communication protocol, and complete the underlying code of WiFi controlling

2. Fix the bug that auto-leveling repeat the compensation after replacing the material

3. Correct the enable timing of limit switch

4. Optimize the motion path cache planning

5. Fix the storage location of the printing progress. Solve the problem of printing progress get lost that caused by upgrading the system or updating the boot screen

6. Add the detection function for hotend temperature abnormality or power shortage 

7. Fix the problem that printhead will return to the printing pieces if there is still power after the print head is moved away when unexpected power failure happens

8. Update the PID automatic calibration algorithm

9.  Add the function that after printing finished, it will wait for the hotend cooling down before automatic shutdown to avoid getting clogged.

10. Add the function of restoring the touch screen factory parameters by pressing the center of the touch screen after power on (used to restore the touch screen function)


Lerdge-X V1.0.3

1. Fix the restore factory settings display refresh problem

2. Add the safety detection logic when the probe is used for Z-axis homing detection (if the auto-leveling probe is used for the Z-axis homing function, the system will move the print head to the middle of the printing platform and then execute Z Axis homing operation)

3. Add the wiring settings for 6 limit switches and leveling probe (Can set normal open or normal close according to the actual limit switch wiring method in the software)

4. Add the memory operation exception reminder page, can accurately troubleshoot the print failure caused by the memory problems.

5. Add the voice prompts when do the automatic leveling probe trigger settings. When the probe is triggered, the buzzer sounds, and if not triggered, there is no voice prompt.

6. Add the reset angle of automatic leveling probe. And when for bltouch error status, reset the motherboard, the bltouch will be reset as well.

7. Fix the issue that the host computer can not read the temperature when the online connected.

8. Modify the control logic of the mobile interface. The axes that without homing can also be controlled directly without forced homing.

9. Change the stop position (when paused) from the original fixed (3,3) coordinate point to the position determined by the origin setting position.


Lerdge-X V1.0.2

1. Fix the bug of the Z axis rise when Delta printers dual heads switching.

2. Add the prompt interface when there is device fault during the offline printing, to solve the crash problem caused by the storage device.

3. Modify the data storage sequence when accidental power-off happens, to ensure the data storage complete.


Lerdge-X V1.0.1

1. Compatible with the latest IPS full viewing angle touch screen

2. Shield the boot forced calibration function, to prevent entry the calibration interface for those connected to the steering gear/servo.


Lerdge-X V1.1.0

The original firmware

Link
Copyright ©2017 - 2017 深圳前海乐积科技有限公司
犀牛云提供企业云服务
X
3

SKYPE 设置

4

阿里旺旺设置

等待加载动态数据...

等待加载动态数据...

5

电话号码管理

  • 13543321692
6

二维码管理

等待加载动态数据...

等待加载动态数据...

展开