购物车图片 Cart ( )
Download News
热点新闻 Hot News

V2.0.6 Lerdge-S Board Firmware and V1.0.3 Lerdge-X Board Firmware

Source:
Release time: 2018-01-26
Viewed: 46975

V2.0.6 Lerdge-S Board Firmware and V1.0.3 Lerdge-X Board Firmware


Lerdge-S V2.0.6

1. Fix the restore factory settings display refresh problem

2. Add the safety detection logic when the probe is used for Z-axis homing detection (if the auto-leveling probe is used for the Z-axis homing function, the system will move the print head to the middle of the printing platform and then execute Z Axis homing operation)

3. Add the wiring settings for 6 limit switches and leveling probe (Can set normal open or normal close according to the actual limit switch wiring method in the software)

4. Add the memory operation exception reminder page, can accurately troubleshoot the print failure caused by the memory problems.

5. Add the voice prompts when do the automatic leveling probe trigger settings. When the probe is triggered, the buzzer sounds, and if not triggered, there is no voice prompt.

6. Add the reset angle of automatic leveling probe. And when for bltouch error status, reset the motherboard, the bltouch will be reset as well.

7. Fix the issue that the host computer can not read the temperature when the online connected.

8. Modify the control logic of the mobile interface. The axes that without homing can also be controlled directly without forced homing.

9. Change the stop position (when paused) from the original fixed (3,3) coordinate point to the position determined by the origin sett


Lerdge-X V1.0.3

1. Fix the restore factory settings display refresh problem

2. Add the safety detection logic when the probe is used for Z-axis homing detection (if the auto-leveling probe is used for the Z-axis homing function, the system will move the print head to the middle of the printing platform and then execute Z Axis homing operation)

3. Add the wiring settings for 6 limit switches and leveling probe (Can set normal open or normal close according to the actual limit switch wiring method in the software)

4. Add the memory operation exception reminder page, can accurately troubleshoot the print failure caused by the memory problems.

5. Add the voice prompts when do the automatic leveling probe trigger settings. When the probe is triggered, the buzzer sounds, and if not triggered, there is no voice prompt.

6. Add the reset angle of automatic leveling probe. And when for bltouch error status, reset the motherboard, the bltouch will be reset as well.

7. Fix the issue that the host computer can not read the temperature when the online connected.

8. Modify the control logic of the mobile interface. The axes that without homing can also be controlled directly without forced homing.

9. Change the stop position (when paused) from the original fixed (3,3) coordinate point to the position determined by the origin sett


NOTIC:

1. Decompress the file and copy the entire folder of "Lerdge_system" to the TF card or U disk root directory (must be the root directory, or may appear to "cannot find the UI file" problem. If you don't know what is the root directory, please Google it. : )  )
2. Boot, select the TF card or U disk that with the file to upgrade in the "Settings" -> "System" -> "System Update (up arrow icon)".
3. Select the "Lerdge_firmware_v2.0.0 (beta1). Bin" file  in the "Firmware" folder, then you can upgrade the firmware.

Note: Do not modify the file name or file path!!!!!

 4. The machine parameters will be reset after the firmware updated, and users need to re-set all the machine parameters. So, please backup the parameters in advance, or pre-configure the configuration file for recovery.

 

When it shows "no find APP!", means updating the firmware fails. The board need to be mandatory updated.
Note: Users must use the TF card for the firmware mandatory updating. U disk cannot achieve that.
1. Rename the firmware file in the the "Lerdge_system" folder to be "Lerdge_firmware_force.bin" after decompressing. And then copy the entire "Lerdge_system" folder to the TF card root directory (must be the root directory).
2. Insert the TF card into the motherboard, reboot, the system will process the mandatory update.
3. Remove the TF card, and delete its root directory "Lerdge_system" folder, to avoid the mandatory update operation again when boot next time.


Link
Copyright ©2017 - 2017 深圳前海乐积科技有限公司
犀牛云提供企业云服务
X
3

SKYPE 设置

4

阿里旺旺设置

等待加载动态数据...

等待加载动态数据...

5

电话号码管理

  • 13543321692
6

二维码管理

等待加载动态数据...

等待加载动态数据...

展开