购物车图片 Cart ( )
Download News
热点新闻 Hot News

V2.0.4

Source:
Release time: 2017-11-11
Viewed: 4879

V2.0.4

V2.0.4

1. Compatible with the latest IPS full viewing angle touch screen

2. Shield the boot forced calibration function, to prevent entry the calibration interface for those connected to the steering gear/servo.


1. Decompress the file and copy the entire folder of "Lerdge_system" to the TF card or U disk root directory (must be the root directory, or may appear to "cannot find the UI file" problem. If you don't know what is the root directory, please Google it. : )  )
2. Boot, select the TF card or U disk that with the file to upgrade in the "Settings" -> "System" -> "System Update (up arrow icon)".
3. Select the "Lerdge_firmware_v2.0.0 (beta1). Bin" file  in the "Firmware" folder, then you can upgrade the firmware.

Note: Do not modify the file name or file path!!!!!

 4. The machine parameters will be reset after the firmware updated, and users need to re-set all the machine parameters. So, please backup the parameters in advance, or pre-configure the configuration file for recovery.

 

When it shows "no find APP!", means updating the firmware fails. The board need to be mandatory updated.
Note: Users must use the TF card for the firmware mandatory updating. U disk cannot achieve that.
1. Rename the firmware file in the the "Lerdge_system" folder to be "Lerdge_firmware_force.bin" after decompressing. And then copy the entire "Lerdge_system" folder to the TF card root directory (must be the root directory).
2. Insert the TF card into the motherboard, reboot, the system will process the mandatory update.
3. Remove the TF card, and delete its root directory "Lerdge_system" folder, to avoid the mandatory update operation again when boot next time.

Previous:NoNext:V2.0.3
  • Recommended
  • 2017 / 11 / 11
    点击次数:
  • 2017 / 10 / 11
    点击次数:
  • 2017 / 09 / 04
    点击次数:
  • 2017 / 08 / 10
    点击次数:
    V2.0.11. Fix the bug of model cooling fan out of control issue2. Fix the bug of automatic leveling probe offset3. Optimize the stability of online control (PC test software: repetier-host, simplified3D)
  • 2017 / 07 / 24
    点击次数:
  • 2017 / 07 / 05
    点击次数:
    1、完善材料检测方法,增强系统抗干扰能力2、添加WIFI端口信息,方便通讯设置3、增加通讯信息识别二维码,可用乐积APP扫码后联机控制4、增加换料功能,机型的高级设置中增加换料参数设置5、修改恢复打印时的温度稳定范围,由老版本的1摄氏度,放宽到5摄氏度6、完善双头切换与自动调平的逻辑关系
Link
Copyright ©2017 - 2017 深圳前海乐积科技有限公司
犀牛云提供云计算服务
X
3

SKYPE 设置

4

阿里旺旺设置

等待加载动态数据...

等待加载动态数据...

5

电话号码管理

  • 13543321692
6

二维码管理

等待加载动态数据...

等待加载动态数据...

展开