购物车图片 Cart ( )
The Tutorials
The wiring diagram, dimensions figure and description of the Lerdge power continued to play module

The wiring diagram, dimensions figure and description of the Lerdge power continued to play module

功效:

Introduce the wirings, the dimensions figure and instructions of Lerdge  power continued to play module


品名:
配方:
Product Description: The power monitoring module, used with Lerdge 3D printer motherboard, can achieve power continued to play, automatically turning off after the printing finished, the software control the power off, monitor the power status and other functions. It can help to achieve interactive printing, and to help in the cases like the unexpected power off or you have to leave during the printing, and other similar issues, considered to be one of the most useful features in 3D printers.

 

Notice on the power continued to play function: In the case of accidental power failure, the system can detecte that situation immediately by this module. But saving the data in this power off moment takes about 1 to 2 seconds to deal with. Most of the switching power supply in the market have enough power to support the system to save the data after the electricity disconnected. But there are also some power supply may not be able to provide the required power to save, which may result in a failed save, and cannot achieve continue printing where it stopped. In this case, users need to switch to higher power supply, or use back-up power supply.
 
(Most of the similar products in the market are called the power to continue to play module, but strictly speaking, it's not rigorous. Actually, more accurate name is power monitoring module.) The similar products in the market are of the same principle, due to the power capacity, the data cannot be 100% saved successfully when accidental power failure happens.



123D Design建模教程—旋转命令

123D Design建模教程—旋转命令

123D Design建模教程—旋转命令


If you need automatically turning off after the printing finished, please select (COMPLETE OFF) on the touch screen setting interface during the printing process.


123D Design建模教程—旋转命令

Recommended
Link
Copyright ©2017 - 2017 深圳前海乐积科技有限公司
X
3

SKYPE 设置

4

阿里旺旺设置

等待加载动态数据...

等待加载动态数据...

5

电话号码管理

  • 13543321692
6

二维码管理

等待加载动态数据...

等待加载动态数据...

展开