购物车图片 Cart ( )
Doucument Case
Hot News / Hot recommended
2017 - 07 - 03
点击次数: 78595
There are 7 parts of the document for the settings. 1. Delta Model Parameters Settings Part.2. XYZ/CoreXY Model Parameters Settings Part. 3. Motors Parameter Settings Part. 4. Temperatu...
2017 - 07 - 03
点击次数: 60314
Lerdge-X Motherboard Basic Wiring Instructions1. Power supply wiringsThere is a dedicated power cable supporting with the motherboard. The power cable is separated into one red line and one black line...
2017 - 07 - 03
点击次数: 85994
1.Wiring diagram of Lerdge-X board and pressure film probe:Leveling points:                           = 3, use three-point detecti...
2013 - 11 - 30
点击次数: 4868
The basic wiring diagram of the Lerdge motherboard

—— Free hotline ——

135-4332-1692

Skype:lerdge .com 

Other

Xixiang street, baoan district, shenzhen city, guangdong province

support@lerdge.com

案例名称: Lerdge WI-FI Tutorial
Release Time: 2018 - 10 - 16
Browse Times:555103
说明: Lerdge Wi-Fi TutorialAbout WIFI: The Lerdge WIFI module is developed based on ESP8266, and the firmware is developed by Lerdge Technology. The other ESP8266 modules on the market can not be directly used on Lerdge motherboard, and Lerdge don't provide the download and program method of the wifi firmware temporarily.Hardware connection1. When using the ESP8266 Wi-Fi module on the Lerdge motherboard, you need to use the online module as a bridge. The ESP8266 cannot be directly installed on the Lerdge motherboard. Installation method shown in Picture 1 and Picture 2.2.Plug the online module with the Wi-Fi module into the Lerdge motherboard. Please do not connect the USB cable, because the system will use the wired connection by default and the Wi-Fi function will be blocked when the USB cable...
Release Time: 2013 - 11 - 30
Browse Times:4868
说明: The basic wiring diagram of the Lerdge motherboard
Release Time: 2017 - 07 - 03
Browse Times:4716
说明: Online Configuration Tool: Detailed explanation of Lerdge configuration fileUsers can use Lerdge online configuration tool for the parameters configuration. The parameters can not be saved before upgrading the firmware, so you need to download the configuration file and save the configurations. After updating the firmware, please use the U disk or TF card to update the saved parameter configuration. Entry the main interface, and then Settings → System Settings → Update.; How to use: modify the machine parameters in this text and save, and then copy it to the TF card or U disk.; Enter the 'Settings' - 'System' - 'System Update', and select the TF card or U disk that with the configuration file.; Select and implement the configuration file. M867 S1;Set the system language (0: Engli...
Release Time: 2017 - 06 - 29
Browse Times:3893
说明: Lerdge Board Auto-leveling Instructions Lerdge board supports three kinds of leveling modes:1. Manual leveling the printing platform through 4 points. This mode is simple and intuitive operation. It's suitable for the printing platform with small area and good flatness.2. Three-points linear leveling mode. It's suitable for the printing platform with large area and good flatness.3. Multi-points (up to 1024 sampling points) matrix grid non-linear leveling method. It can level the printing platform with large area but bad flatness.Brief introduction of Lerdge board auto-leveling principles.Leveling principles of the Three-points linear leveling mode: The non-collinear three points determines a plane. By sampling the three non-line points on the printing platform, to calculate the plane ...
Release Time: 2017 - 07 - 03
Browse Times:67935
说明: 1. make the picture in size of 480*320, and save it as .bmp file.2. Click the download button to download the tool .3.open the software Img2Lcd.exeClick Open, choose the picture that you need (with the size in 480*320mm, and the format of .bmp).4.set the settings as below:5.then save it in ****.bin6. find the .bin file and modify the suffix name to .logoIf the system says want to sure modify the name, choose yes.7. Copy this .logo file to your TF card, and insert teh TF card to the board, update it in the 'system update', choose the file and 'print' it, after update finished, reboot, then totally accomplished.
Release Time: 2017 - 07 - 03
Browse Times:1256
说明: LERDGE Board 3.5 inches Touch screen shell print STL file
14页次2/3首页Previous123Next尾页
Link
Copyright ©2017 - 2017 深圳前海乐积科技有限公司
犀牛云提供企业云服务
X
3

SKYPE 设置

4

阿里旺旺设置

等待加载动态数据...

等待加载动态数据...

5

电话号码管理

  • 13543321692
6

二维码管理

等待加载动态数据...

等待加载动态数据...

展开