购物车图片 Cart ( )
Doucument Case
Hot News / Hot recommended
2017 - 07 - 03
点击次数: 76008
There are 7 parts of the document for the settings. 1. Delta Model Parameters Settings Part.2. XYZ/CoreXY Model Parameters Settings Part. 3. Motors Parameter Settings Part. 4. Temperatu...
2017 - 06 - 29
点击次数: 2360
Lerdge Board Auto-leveling Instructions Lerdge board supports three kinds of leveling modes:1. Manual leveling the printing platform through 4 points. This mode is simple and intuitive operation....
2013 - 11 - 30
点击次数: 3064
The basic wiring diagram of the Lerdge motherboard
2017 - 07 - 03
点击次数: 3483
Online Configuration Tool: Detailed explanation of Lerdge configuration fileUsers can use Lerdge online configuration tool for the parameters configuration. The parameters can not be saved before...

—— Free hotline ——

135-4332-1692

Skype:lerdge .com 

Other

Xixiang street, baoan district, shenzhen city, guangdong province

support@lerdge.com

Release Time: 2017 - 07 - 03
Browse Times:76008
说明: There are 7 parts of the document for the settings. 1. Delta Model Parameters Settings Part.2. XYZ/CoreXY Model Parameters Settings Part. 3. Motors Parameter Settings Part. 4. Temperature Parameter Settings Part. 5. Motherboard Operation Part. 6. Print Settings Part. 7. System Update Part. Acceleration:X/Y/Z/E axis maximum acceleration: set the maximum speed of each axis when moving. The greater the acceleration, the faster the changes in the speed of each axis. (Please note that excessive acceleration may cause the machine to the vibration intensifies and even lead to motor locked-rotor when it's running.)Printing Acceleration: the integrated acceleration when the printer is printing items. This value directly affects the reaction sensitivity of changing...
Release Time: 2017 - 07 - 03
Browse Times:7798
说明: Lerdge BoardFirmware version update descriptionV1.1.0The original firmwareV1.1.11. Optimize the positioning algorithm of the pause and start printing.2. Optimize the real-time calculation algorithm of motor-driven.3. Add the light control function.V1.1.21. Optimize the PID temperature regulation control.2. Optimize the stability of thermocouple temperature measuring.3. Add the setting function of homing origin.V1.1.31. Add the motor cut-off frequency option in the options of the motor setting. The motherboard motor drive frequency can be up to 200 KHz. Please choose according to the use of the motor drive module cut-off frequency. For example, if use DRV8825, please choose 50 KHz; if A4988, please choose 100 KHz; and if LV8729, please choose 50 KHz.2. Modify the control interface, remove t...
Release Time: 2017 - 06 - 29
Browse Times:2360
说明: Lerdge Board Auto-leveling Instructions Lerdge board supports three kinds of leveling modes:1. Manual leveling the printing platform through 4 points. This mode is simple and intuitive operation. It's suitable for the printing platform with small area and good flatness.2. Three-points linear leveling mode. It's suitable for the printing platform with large area and good flatness.3. Multi-points (up to 1024 sampling points) matrix grid non-linear leveling method. It can level the printing platform with large area but bad flatness.Brief introduction of Lerdge board auto-leveling principles.Leveling principles of the Three-points linear leveling mode: The non-collinear three points determines a plane. By sampling the three non-line points on the printing platform, to calculate the plane ...
Release Time: 2013 - 11 - 30
Browse Times:3064
说明: The basic wiring diagram of the Lerdge motherboard
Release Time: 2017 - 07 - 03
Browse Times:3483
说明: Online Configuration Tool: Detailed explanation of Lerdge configuration fileUsers can use Lerdge online configuration tool for the parameters configuration. The parameters can not be saved before upgrading the firmware, so you need to download the configuration file and save the configurations. After updating the firmware, please use the U disk or TF card to update the saved parameter configuration. Entry the main interface, and then Settings → System Settings → Update.; How to use: modify the machine parameters in this text and save, and then copy it to the TF card or U disk.; Enter the "Settings" - "System" - "System Update", and select the TF card or U disk that with the configuration file.; Select and implement the configuration file. M867 S1;Set...
Release Time: 2017 - 07 - 03
Browse Times:661
说明: LERDGE Board 3.5 inches Touch screen shell print STL file
15页次1/3首页Previous123Next尾页
Link
Copyright ©2017 - 2017 深圳前海乐积科技有限公司
X
3

SKYPE 设置

4

阿里旺旺设置

等待加载动态数据...

等待加载动态数据...

5

电话号码管理

  • 13543321692
6

二维码管理

等待加载动态数据...

等待加载动态数据...

展开