购物车图片 Cart ( )
Doucument Case
Hot News / Hot recommended
2017 - 07 - 03
点击次数: 79838
There are 7 parts of the document for the settings. 1. Delta Model Parameters Settings Part.2. XYZ/CoreXY Model Parameters Settings Part. 3. Motors Parameter Settings Part. 4. Temperatu...
2018 - 10 - 19
点击次数: 60944
Lerdge-K Motherboard Basic Wiring Instructions1. Power supply wiringsThere is a dedicated power cable supporting with the motherboard. The power cable is separated into one red line and one black line...
2017 - 07 - 03
点击次数: 62421
Lerdge-X Motherboard Basic Wiring Instructions1. Power supply wiringsThere is a dedicated power cable supporting with the motherboard. The power cable is separated into one red line and one black line...
2019 - 03 - 16
点击次数: 90021
1.Wiring diagram of Lerdge-K board and pressure film probe:Leveling points:                           = 3, use three-point detecti...

—— Free hotline ——

135-4332-1692

Skype:lerdge .com 

Other

Xixiang street, baoan district, shenzhen city, guangdong province

support@lerdge.com

Release Time: 2017 - 07 - 03
Browse Times:10741
说明: Lerdge BoardFirmware version update descriptionV1.1.0The original firmwareV1.1.11. Optimize the positioning algorithm of the pause and start printing.2. Optimize the real-time calculation algorithm of motor-driven.3. Add the light control function.V1.1.21. Optimize the PID temperature regulation control.2. Optimize the stability of thermocouple temperature measuring.3. Add the setting function of homing origin.V1.1.31. Add the motor cut-off frequency option in the options of the motor setting. The motherboard motor drive frequency can be up to 200 KHz. Please choose according to the use of the motor drive module cut-off frequency. For example, if use DRV8825, please choose 50 KHz; if A4988, please choose 100 KHz; and if LV8729, please choose 50 KHz.2. Modify the control interface, remove t...
Release Time: 2017 - 07 - 03
Browse Times:10741
说明: Lerdge BoardFirmware version update descriptionV1.1.0The original firmwareV1.1.11. Optimize the positioning algorithm of the pause and start printing.2. Optimize the real-time calculation algorithm of motor-driven.3. Add the light control function.V1.1.21. Optimize the PID temperature regulation control.2. Optimize the stability of thermocouple temperature measuring.3. Add the setting function of homing origin.V1.1.31. Add the motor cut-off frequency option in the options of the motor setting. The motherboard motor drive frequency can be up to 200 KHz. Please choose according to the use of the motor drive module cut-off frequency. For example, if use DRV8825, please choose 50 KHz; if A4988, please choose 100 KHz; and if LV8729, please choose 50 KHz.2. Modify the control interface, remove t...
Release Time: 2017 - 07 - 03
Browse Times:79838
说明: There are 7 parts of the document for the settings. 1. Delta Model Parameters Settings Part.2. XYZ/CoreXY Model Parameters Settings Part. 3. Motors Parameter Settings Part. 4. Temperature Parameter Settings Part. 5. Motherboard Operation Part. 6. Print Settings Part. 7. System Update Part. Acceleration:X/Y/Z/E axis maximum acceleration: set the maximum speed of each axis when moving. The greater the acceleration, the faster the changes in the speed of each axis. (Please note that excessive acceleration may cause the machine to the vibration intensifies and even lead to motor locked-rotor when it's running.)Printing Acceleration: the integrated acceleration when the printer is printing items. This value directly affects the reaction sensitivity of changing...
Release Time: 2018 - 10 - 19
Browse Times:60944
说明: Lerdge-K Motherboard Basic Wiring Instructions1. Power supply wiringsThere is a dedicated power cable supporting with the motherboard. The power cable is separated into one red line and one black line. The red line is connected with DC 12V/24V power positive, and the black one is connected with the negative.The power interface on the board side is with buckle to prevent incorrect insert, but still need to pay attention to that. Incorrect connection of the positive and negative poles of the power supply may burn the motherboard。The correct power wiring as shown below.2. Motherboard motor drive module socket introductionLerdge-X motherboard motor drive port adopts the same interface definition with pololu module. The motherboard driver interface definition as shown belowPortDescriptionNoteEN...
Release Time: 2017 - 07 - 03
Browse Times:62421
说明: Lerdge-X Motherboard Basic Wiring Instructions1. Power supply wiringsThere is a dedicated power cable supporting with the motherboard. The power cable is separated into one red line and one black line. The red line is connected with DC 12V/24V power positive, and the black one is connected with the negative.The power interface on the board side is with buckle to prevent incorrect insert, but still need to pay attention to that. The correct power wiring as shown below.2. Motherboard motor drive module socket introductionLerdge-X motherboard motor drive port adopts the same interface definition with pololu module. The motherboard driver interface definition as shown belowPortDescriptionNoteENABLEMotor enable control port, the system uses low-level enable program.When the motor needs to be en...
Release Time: 2019 - 03 - 16
Browse Times:90021
说明: 1.Wiring diagram of Lerdge-K board and pressure film probe:Leveling points:                           = 3, use three-point detection, and linear leveling.                            3, use multi-point non-linear leveling.X-axis probe offset: the starting point and nozzle are overlap in the X direction, just set to 0.Y-axis probe offset: the starting point and nozzle are overlap in the Y direction, just set to 0.Z-axis probe offset: the starting point and nozzle are overlap in the Z direction, just set to 0.Probe for Z-axis min limit: pressure film is not recommended  to be used to level and limit at the same time. Otherwise, the module needs to be...
17页次1/3首页Previous123Next尾页
Link
Copyright ©2017 - 2017 深圳前海乐积科技有限公司
犀牛云提供企业云服务
X
3

SKYPE 设置

4

阿里旺旺设置

等待加载动态数据...

等待加载动态数据...

5

电话号码管理

  • 13543321692
6

二维码管理

等待加载动态数据...

等待加载动态数据...

展开